Skip to content

IBC/Rob Cosman Revival Plane Blade Set (2 inches)

Sold out
Original price $137.00 - Original price $137.00
Original price
$137.00
$137.00 - $137.00
Current price $137.00
Availability:
Out of stock
Gallery
Full Description
Customer Reviews

One of the best ways to improve the performance of an older Stanley or Record plane is to replace its original blade set with a thicker, premium blade set. 

Not satisfied with the way replacement blade sets fit and worked in older planes, I teamed up with IBC and designed a blade set specifically designed to work in older planes   

The problem is that the older plane's adjustment system was not designed for modern, thicker, premium blades.  To solve this, we added special "tabs" to our premium blade set that enables it to engage the older plane's adjustment system in the same manner as the original blade set.  This allows the blade set to adjust like an original Stanley but perform like the modern, premium blade that it is.

  • 2 inch wide Blade & Chip Breaker Set. Fits older Stanley and Record No. 4 and No. 5 planes.

  • At .140 inches thick, this blade set is almost twice as thick as that found in older Stanley and Record planes.

  • It may be necessary to file open your plane's mouth to accommodate the thicker blade.

  • Blade is high vanadium A-2 steel, 0.140” thick, 60-62HRc and cryogenically treated to optimize the cutting edge’s wear resistance properties.

  • Chipbreakers are unique – high carbon 0-1 steel, 0.125” thick and hardened to 30-32HRc for added stiffness.

  • Bevels are mated to achieve a flatness tolerance of +/-0.001” along the entire width of the cutting edge.

Customer Reviews

Based on 3 reviews
0%
(0)
33%
(1)
0%
(0)
33%
(1)
33%
(1)
V
Victor Ammons
IBC #5 replacement blade

After taking 3 months to receive my blade on opening the package I saw the blade was rusted and pitted all along the cutting edge. The Cosmans asked me to ship it back to IBC and they would examine it and replace it if warranted. After waiting another two months I received another package from IBC and it was the wrong blade. An 1 3/4 instead of 2 inch. Kudos to the Cosmans; they refunded my purchase price without arguement. The blade looks like it is great, and maybe it will be my marking blade like Rob uses sometimes. IBC's service is terrible.

B
Bill Kelly
Required lots of work

The iron and chip breaker are solid, but I needed to do a lot of work on my Stanley/Bailey #5 and on the blade itself. As expected, I had to file the mouth of the plane to make it big enough to accept the thicker blade. I needed to file about 1/8”, which is quite a lot. The blade still wouldn’t advance beyond the sole because the opening in the end cap hit the bolt that holds the chip breaker, unless I had the chip breaker about 1/2 inch behind the tip of the blade. Therefore I needed to grind down the blade about 5/16”. Having done so, and with it sharpened using Robs method, it works fine. Over time, with multiple sharpenings, I will be able to set the chip breaker at the 1/16” set-back that I prefer.

V
VictorHajiUusO Ammons
IBC blade

POOR! I have emailed Rob twice, sent a message via the contact us page of your website and a message to one of the live videos and still have not heard anything from RC. The blade I received is rusted and pitted on both corners and I do not want to have to do major repairs just to get an acceptable blade with a sizable portion of the blade ground off.